laser sailboat dolly trailer

Laser Dollies and Trailers

Heading out on the water is exciting, but the journey from land to water isn't always smooth sailing. One way to make it easier is by using a laser dolly as well as a trailer.

The most effective way to transport your dinghy is with a dolly or trailer. If you are loading your dinghy onto your roof racks or onto your box trailer, there is an alternative, and it may be cheaper than you think. This is the safest way to get your boat from home to the water and back again without any damage.

Dinghy Dolly & Trailer Options

Keep your dinghy safe when traveling long distances or for short trips by pulling it on a quality-made dolly or trailer.

Trailers should be manufactured to highway standard specifications making them safe to use to get to your favorite lake or racecourse.

And the dollies make it much easier to get your dinghy in and out of the water single-handedly.

Below you will find the following:

• Dollies for Sunfish or Laser sailboats
• Dinghy Trailers
• Dollie/Trailer Accessories

Image	Title	Rating	More Info
	Dynamic Dolly Laser	5.0 out of 5 stars
	Right-On Dolly & Trailer for Sunfish and Laser Sailboats	3.5 out of 5 stars
	Dolly for Laser Sailboats with Beach Wheels	5.0 out of 5 stars
	BRIS Stainless Steel Launching Dolly	4.2 out of 5 stars
	12" Boat Dolly Wheel & Tire	4.5 out of 5 stars

Dynamic Dolly Laser

This lightweight, easy-to-handle Laser Dolly is made from aluminum with stainless steel screws. It is well-engineered to the point where it can easily be taken apart to fit in the back of a car for transporting elsewhere. When broken down, there are only five primary parts - two wheels, the axel-strap assembly, and two strut assemblies. Simple, yet strong and effective.

Right-On Dolly & Trailer for Sunfish and Laser Sailboats

Made with a powder-coated steel frame, this lightweight dolly and trailer combo works with various small sailboats including Laser, Sunfish, and RS Feva. It comes complete with soft springs that absorb vibration during transportation. The design uses a fold-up locking tongue stand. The load capacity is set at 300 pounds.

Dolly for Laser Sailboats with Beach Wheels

The welded, all-metal frame of this dolly is made from single-tube aluminum with stainless steel screws. It also comes with a heavy-duty 3-inch non-stretch polyester sling for boat support. It can be easily assembled and disassembled, depending on your specific needs. The lightweight, sturdy unit weighs just 20 pounds when the wheels have been removed.

BRIS Stainless Steel Launching Dolly

Although this launching dolly isn’t designed specifically for Lasers, and the quality may not be as good as some other dollies, Lasers still fit so this may work well for you. Made from stainless steel, this dolly has 16-inch wheels and can hold a maximum weight of 160 kilograms and boats up to 14 feet long. It is designed to be handled effectively by a single person.

12" Boat Dolly Wheel & Tire

Need a new dolly wheel or 2? This is the perfect replacement for several types of dollies used to carry Optimist and Laser class sailboats. The standard pneumatic dolly wheel measures 12 inches in diameter. With a load capacity of 500 pounds, this dolly wheel package is a perfect upgrade.

What Is A Laser Dolly?

A Laser dolly is a specialized piece of equipment designed to help transport, launch, and retrieve small sailboats. They are also called boat or dinghy dollies as they can carry more than just Laser class sailboats. Made from aluminum or stainless steel, these sturdy dollies are also lightweight. The design is quite simple, there is a frame and wheels with supports to hold a dinghy. The design permits a single person to easily move a loaded dinghy from storage or off the trailer to the edge of a body of water without requiring a large boat trailer.

Here is a closer look at the parts of a Laser dolly:

• Frame : This is the primary structure of the dolly and includes supports and cradles for holding the sailboat. There are also adjustable straps to keep the dinghy secure.
• Wheels and Tires : The wheels and tires of the dolly are designed to distribute weight evenly to permit easy handling of the unit. The tires are large enough to make maneuverability easy on different surfaces ranging from grass and pavement to sand.
• Supports : The supports, which are either adjustable arms or padded cradles/straps, are designed to capture and hold the weight of a small sailboat when moved from one location to another.
• Straps/Fasteners : These components are used to hold the dinghy securely in place to prevent shifting when being transported.

There are several advantages to using a Laser dolly. They include:

• Ease of Transportation : A dolly makes moving a Laser and other dinghies from storage to the water much easier. So easy, that most dollies are designed so that they can be used by just one person. Plus, a dolly is handy if vehicle access is limited to where the sailboat is stored or where it is going to be launched.
• Protection : With the way a dolly supports a sailboat when being moved, the risk of damage to the hull is greatly reduced.
• Accessibility : A dolly permits sailors to access their sailboats from virtually anywhere such as from a beach, ramp, or any other access point on the water.
• Convenience : Because dollies have a compact design and are easy to store, they are a practical solution in situations where space is not available for bigger trailers.

Exploring Laser Dinghy Trailers

Trailers are different from dollies. A dolly can be moved manually by a single person whereas a trailer is much heavier and requires a vehicle to tow it from location to location. Plus, dollies are not designed to be towed but boat trailers are.

Types of Trailers Suitable for Laser Dinghies

There are two main types of trailers for hauling boats. They are as follows:

• Single-Boat Trailers : As the name indicates, this type of trailer is designed specifically to move just one Laser dinghy. Boat owners who have just a single dinghy will find the most use out of one of these types of boat trailers.
• Customized Trailers for Multiple Boats : Depending on the number of boats to be transported, the other solution is a customized trailer made to safely hold and move more than a single boat. These are commonly used by sailors who own two or more sailboats, training centers, or sailing clubs.

Trailer Components and Features

There are several different parts to a boat trailer. Here is a breakdown of what they are:

• Trailer Frame and Construction : Durable materials like aluminum, stainless steel, or galvanized steel are used in boat trailer construction. These materials provide durability and resist rust and corrosion.
• Axles, Wheels, and Tires : For smooth towing and stability on various surfaces, boat trailers come with good-quality axles, wheels, and tires.
• Boat Support : Supports on rollers are used to evenly distribute the weight of the boat or dolly being transported. The supports also reduce the risk of damage to the boat hull.
• Lighting and Safety Equipment : For safe towing, boat trailers come equipped with lighting including brake lights and turn signals. Safety straps and chains hold the boat securely in place when being moved.

Loading and Unloading a Laser Dinghy Onto A Trailer

The task of loading or unloading a Laser dinghy requires a few simple steps. Here is a step-by-step description of the process:

• Securing the Boat for Transport : Loading a Laser dinghy onto a trailer is rather easy. Carefully align the boat’s hull with the trailer supports and slowly guide the boat onto the trailer. Watch to ensure the boat is balanced and centered.
• Strapping and Tying Down Securely : After you get the boat properly positioned on the trailer, use straps to secure it in place. The boat should be secure enough to not shift when moved.

If the trailer you have can accommodate both a dolly and boat, you can easily load the entire combo of dinghy and dolly onto the trailer, and then strap it down securely to avoid movement while in transit.

Maintenance and Care

To keep your dolly or trailer in good working order and lasting longer, it is vital to perform essential maintenance and care. Here are a few tips to assist with that:

Proper Maintenance Practices for Dollies and Trailers

• Regular Cleaning and Corrosion Prevention : Rinsing your dolly or trailer after each use will prevent corrosion and to keep rust from forming, add a protective coating to any exposed metal parts. Washing with fresh water will remove saltwater and dirt which can create conditions where corrosion can form.
• Inspection of Wheels, Tires, and Frame : By examining these parts regularly, and addressing minor problems when noted, you can avoid the development of more serious issues. Expect to see signs of wear and tear but note any rapid progression which could signal a bigger concern.
• Lubrication of Moving Parts : Ensure that moving parts like axles bearings and hinges are lubricated regularly. This decreases friction and provides ease of use. There are marine-grade lubricants that have been developed to withstand water exposure. Use these on your dolly or trailer.

Storing Dollies and Trailers During Off-Season

There may be a time each year that you will be faced with storing your dolly or trailer until the sailing season begins again. Here are two considerations to keep in mind:

• Sheltered Storage Options : It is important to store dollies and trailers in covered areas. This protects them from exposure to the elements that may result in premature aging or damage.
• Removing Tires and Securing the Trailer : For long-term storage, it may be a good idea to remove tires from dollies or trailers. This prevents the tires from developing flat areas. By securing the dolly or trailer in place, you keep it from tipping over or moving.

Extending the Lifespan of Dollies and Trailers

As is the case with anything, the better you take care of something, the longer it will last and provide service to you. Dollies and trailers are no different. Here are two ways to keep your dolly or trailer in top shape:

• Repairs and Replacements : Regularly inspect your dolly or trailer and if you discover an issue, address it as quickly as possible. To maintain its structural integrity, repair or replace any damaged parts. Pay close attention to minor issues to ensure they don’t become major problems in the future.
• Upgrades and Enhancements : Keep up to date on dolly or trailer design or material advancements. Ensure that wheels are upgraded when needed and that features designed to improve performance and safety are utilized.

<< Back to Laser Sailing Tips Store Home

Click on the icons below to check out more in the store...

Laser Dinghy Covers

Wetsuits and Rash Vests

Sailing Gloves

Sailing Hats

Sailing Watches

Sailing Books

Sailing Cameras

Sailing Boots

Sailing Bags

Sailing Shorts

Sailing Shirts and Jackets

Blocks, Cleats and Sails

• RV Parts & Accessories
• Towing Products & Winches
• Trailer Dollies

Image Unavailable

• To view this video download Flash Player

Right-On Dolly Trailer for Sunfish and Laser Sailboats

Delivery & support.

Brand	RIGHT-ON TRAILER
Frame Material	Alloy Steel
Maximum Weight Recommendation	300 Pounds
Seating Capacity	1
UPC	780305569289

Customers who viewed this item also viewed

Product Description

One person easy loading Soft springs and sturdy frame to absorb road vibration Fold up locking tongue stand Trailer is not immersed in the water for launching. Our dolly trailer works with the Seitech, Dynamic, and Intensity dollies for Laser, Sunfish, RS Fevaand other small sailboats. The trailer has a sturdy powder coated steel frame and soft springs to absorb road vibration while protecting your boat. Additionally, the trailer never needs to be immersed in the water which extends the life of bearings, lights, and frame.

Product information

Technical details.

Package Weight	‎185 Pounds
Brand Name	‎RIGHT-ON TRAILER
Part Number	‎LCI-879P

Additional Information

ASIN	B00O3F0JE0
Customer Reviews	2.8 out of 5 stars
Best Sellers Rank	#2,454,425 in Automotive ( ) #155 in
Date First Available	March 24, 2016

Fields with an asterisk * are required

: : : Enter the store name where you found this product : Please select province : to provide feedback. \n' + ' ' ); } function getThankYouDiv(thankMsg) { return ( ' \n' + '

' ); } function getLoadingGifDiv() { return '

Looking for specific info?

Customer reviews.

• 5 star 4 star 3 star 2 star 1 star 5 star 37% 0% 0% 31% 33% 37%
• 5 star 4 star 3 star 2 star 1 star 4 star 37% 0% 0% 31% 33% 0%
• 5 star 4 star 3 star 2 star 1 star 3 star 37% 0% 0% 31% 33% 0%
• 5 star 4 star 3 star 2 star 1 star 2 star 37% 0% 0% 31% 33% 31%
• 5 star 4 star 3 star 2 star 1 star 1 star 37% 0% 0% 31% 33% 33%

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

Reviews with images

• Sort reviews by Top reviews Most recent Top reviews

Top reviews from the United States

There was a problem filtering reviews right now. please try again later..

• Amazon Newsletter
• About Amazon
• Accessibility
• Sustainability
• Press Center
• Investor Relations
• Amazon Devices
• Amazon Science
• Sell on Amazon
• Sell apps on Amazon
• Supply to Amazon
• Protect & Build Your Brand
• Become an Affiliate
• Become a Delivery Driver
• Start a Package Delivery Business
• Advertise Your Products
• Self-Publish with Us
• Become an Amazon Hub Partner
• › See More Ways to Make Money
• Amazon Visa
• Amazon Store Card
• Amazon Secured Card
• Amazon Business Card
• Shop with Points
• Credit Card Marketplace
• Reload Your Balance
• Amazon Currency Converter
• Your Account
• Your Orders
• Shipping Rates & Policies
• Amazon Prime
• Returns & Replacements
• Manage Your Content and Devices
• Recalls and Product Safety Alerts
• Registry & Gift List

• Conditions of Use
• Privacy Notice
• Consumer Health Data Privacy Disclosure
• Your Ads Privacy Choices

12002 WE SHIP WORLDWIDE! We charge the actual cost of shipping. You may email us for a shipping cost estimate. intensitysails(at sign)gmail.com US$10 MINIMUM ORDER Accessories Confirm your age Are you 18 years old or older? Come back when you're older Sorry, the content of this store can't be seen by a younger audience. Come back when you're older. ILCA/LASER DOLLY PART #:12002 Dynamic Dolly, Type 2 Dolly style allows bow of boats with a curled gunwale to hang from a specifically shaped handle fitting. Snug-fitting edge trim atop the handle fitting protects the gunwale gelcoat. Type is suitable for Laser, Byte, Gig Harbor 16, and more. Boat-specific tube and sling lengths provide a custom fit for each boat, enabling a balanced handle load and easy maneuvering. All joint fittings are through-bolted and designed for increased torque stability. Strong, 3” non-stretch, polyester sling provides wrap-around boat support. Adjustable, flexible V-fitting on tongue tube provides boat support forward of the sling and prevent boat and aluminum contact. Eyelets on sling and handle fittings facilitate securing boat to dolly in storage, on trailers or in racks. Tie-down with the handle fitting eyelet helps prevent  slippage on steep ramps. Easy dolly breakdown using the snap buttons on wheel shaft and tongue tube, as well as wing nuts on axle tube cross fitting. Pneumatic, non-corrosive, 16” x 4” wheels can be secured on wheel shaft with provided screws for added security. For soft sand conditions, tire pressure can be reduced to increase tire footprint. Customer Reviews East to assemble and super lightweight! Worth every penny. I walk it to my launch spot about 12 minutes from house and it’s not hard at all. "Amazing product, works perfectly and is being used 4-5 x weekly without any problems. Assembly easy and directions clear. They were helpful with questions I had before purchase. It also arrived to us on West Coast very quickly. All around 5 star experience!" Great Product. Great Service. Great engineering. Molded parts precision fit. Corrosion free materials. Easy to assemble. Balance with boat on trailer (tongue weight) just right. Purchased with beach wheels. Could not be happier with selection. You may also like Sailboat Dollies / Trailers Qty in Cart Multi-Sport Trailer Right-On-Trailer Multi-Sport Box Rack Trailer 8′ Cat Trax Catamaran Beach Wheels with Standard Hull Cradles 8′ Beam Florida Sail craft GALVANIZED KEEL ROLLER BOAT/PWC TRAILERS (10'-14') Continental Trailers End cap for Cat Trax 8′ Cat Trax Catamaran Beach Wheels with Wide Hull Cradles 8′ Beam 8’6″ Cat Trax Catamaran Beach Wheels Wide Hull Cradles 8’6″ Beam KAYAK / SMALL BOAT TRAILER (GALVANIZED GT1612) Sailboat Dolly Trailer 8' Cat Trax Catamaran Beach Wheels 8.6′ Cat Trax Catamaran Beach Wheels Cat Trax "T" Handle Ruff-Sport Trailer Sailboat Dolly Trailer with Laser Pico Dolly Combo 8′ Tiger Trax Catamaran Beach Dolly 8′ Beam Sailboat Dolly Trailer with Sunfish Dolly Combo 7′ Cat Trax Catamaran Beach Wheels Box Rack Kit for Multi-Sport or Dolly Trailers Sunfish Dolly NON GUNWHALE HUNG Dynamic Dollies Catamaran Trailer for Hobie, Nacra, Prindle Total: items / Add all to cart Adding your products to cart Laser Sailboat Parts Laser Trailers & Dollies Dynamic Dollies Laser 4000 Dynamic Dollies Laser 2000 Dynamic Dollies Laser 2 Dynamic Dollies Laser 10% Off Hobie Parts / 15% Off Rigging / 10-15% Off Select Kayaks - SHOP NOW Call Us +1-503-285-5536 Sign in & Register Recently Viewed General Parts Dollies, Trailers, & Racks Dynamic Laser / ILCA Sailboat Dolly Dynamic dollies & racks. Create New Wish List Write a Review Frequently Bought Together: Description High-Quality Dolly Designed for Laser / ILCA Sailboats Dynamic Dollies makes launching, retrieving, moving, and storing your ILCA or Laser sailboat a breeze. This dolly is designed specifically for your boat so you can be sure of a great fit. Aluminum tubing with high strength plastic fittings make this dolly lightweight and easy to assemble and transport. The tube sizing and balanced handle load make for easy maneuverability. 16 in x 4 inch wheels with ball bearings roll easily on any surface and a strong, non-stretch sling supports the hull. Dynamic Dollies is the industry leader in beach dollies, offering high quality products that are durable, easy to use, and provide excellent support for your boat. One year warranty included on all new Dynamic Dollies with replacement parts and large wheel upgrades available. Designed for the ILCA / Laser - Perfectly balanced and the right dimensions for your ILCA / Laser sailboat. Easy Rolling Wheels  - Pneumatic, non-corrosive, 16 in x 4 in wheels can be secured on wheel shaft with provided screws for added security. For soft sand conditions, tire pressure can be reduced to increase tire footprint. with Delrin ball bearings for easy rolling on any surface Lightweight Aluminum Construction  - 1-1/2 in square structural-grade, anodized aluminum with boat-friendly round corners is both lightweight and strong. High Strength Plastic Joints  - Injection-molded tough glass-reinforced UV protected plastic joint components are used to connect the aluminum tubing, with stainless steel through-bolts for extra stability. Supportive Bow Bracket - Curved bow bracket for supporting the bow of your boat. Support Sling  - 3 inch non-stretch polyester sling, ideal for boat storage and retrieval in wavy conditions. Tie-Down Points  - Eyelets on all handle and sling fittings to easily secure boat to dolly Easy Lift Handle  - The large forward handle and balanced load make moving your dolly super easy Quick Transport  - The dolly can be broken down into several sections for easy transport in a vehicle or for storage when not in use Maintenance Free  - Completely corrosion-proof and maintenance free components for long life Made in the USA  - Manufactured by Dynamic Dollies & Racks in Bristol, Rhode Island Warranty  - Every care has been taken in the manufacture of your Dynamic Dolly. It is warranted for one year against defects in workmanship and material when properly used, cared for, and maintained. Dynamic will replace, free of charge, any part that proves, upon examination, to be defective under normal use. Owners are responsible for shipping product to Dynamic Dollies for inspection. Assembly Instructions  -  Dynamic Type 2 Dolly Assembly Video  -  Dynamic Dolly Assembly Product Reviews (3) Amazing product. Posted by Elisabeth P on Mar 28th 2023 Amazing product, works perfectly and is being used 4-5 x weekly without any problems. Assembly easy and directions clear. They were helpful with questions I had before purchase. It also arrived to us on West Coast very quickly. All around 5 star experience! Great product Posted by Graham on Mar 28th 2023 Great Product. Great Service. Review from dynamicdollies.com Great engineering Posted by Pete Craig on Mar 28th 2023 Great engineering. Molded parts precision fit. Corrosion free materials. Easy to assemble. Balance with boat on trailer (tongue weight) just right. Purchased with beach wheels. Could not be happier with selection. Review from dynamicdollies.com Shipping & Returns Delivery Info: Enjoy Free Standard Shipping on most orders* to the Continental United States over $99. Our Standard Shipping method utilizes USPS, UPS, and FedEx to send packages near and far. Oversize/Freight shipping (where applicable), Expedited Shipping (where available), and rates to other destinations will be calculated at checkout. See our Shipping Page for more information (and exceptions). Returns Info: Your 100% satisfaction is our goal - we want you to love your sailing gear, but if something doesn't work out, we accept returns on most new, unused items*. Returns can be made within 366 days (1 year + 1 day) of your original order date. Exceptions include (and are not limited to) cut line, Rig Shop products, special order items, numbered sailors, and items used or worn sailing. See our Returns Page for more information. Prop 65 Warning Related Products Dynamic Laser 2 Sailboat Dolly Dynamic Sunfish Sailboat Dolly Dynamic C420 / FJ Sailboat Dolly (Double Tube) Laser 2000 Sailboat Dolly Subscribe to our newsletter. Sign up for our newsletter to receive exclusive discounts, new product announcements, and upcoming sales. Seacycle  Spring Creek         Seitech Models are available for any Boat, Canoe or Sailboat Typical  Seitech Launching Doll Specifications Dolly Model With Standard Wheels Dolly Model   Standard Wheels   Dolly Model With FAT Wheels and Dolly  and Similar Pedal Craft Dolly and Catamaran Dolly     Seitech Launching Dolly Wheel Options                      Shop Multi-Sport Trailers Multi-Sport Accessories Multi-Sport Videos Multi-Sport FAQs Shop Dolly Trailers Parts & Accessories Dolly Trailer Videos Dolly Trailer FAQs Ruff-Sport Trailers Ruff-Sport Accessories ILCA Dinghy NEW! ILCA Dinghy Dolly Trailers Dolly Trailer Accessories Ruff-Sport Trailer Multi-Sport Trailers Terms and Conditions Multi-Sport Trailer Videos Dolly Trailer FAQ Ruff-Sport FAQ Dolly Trailer & Sunfish Dolly Combo $ 1,399.99 – $ 1,449.99 Find out more Description Additional information, assembly instructions. Unassisted loading of your small sailboat is possible through the brilliant design of our dolly trailer. You never have to lift the whole weight of the boat. New for 2023! Improved corrosion resistance through new powder coat process. Larger and stronger 2″ ball hitch coupler. Simplified and improved trailer light wiring with quick-connects and dedicated grounding wire. Flat washers added to hardware kit. In stock and shipping daily.  Note: The Dynamic Dolly for Sunfish has silver colored strap and wheels have delrin ball bearings. Item ships with Sunfish Dolly Note:  Stock to be replenished early in September 2024.   Dealers and resellers are depleted also.  Please check back. Weight 225 lbs Assembly , , 221011 – TS-796 Assembly Instructions-REVC-compressed LCI-8791P Assembly Rev C1_small Related products Dynamic Sunfish Dolly with Standard Wheels Dolly Trailer Right-On Dolly Trailer for Megabyte Sailboat Dolly Trailer with Box Rack Website: EMGraphics.net, LLC 120 IMAGES Dolly Trailer & Laser Dolly Combo Rigging & Launching Your Laser Sailboat Dolly Trailer & Laser Dolly Combo Laser sailboat complete with mast, sail, boom, centerboard, rudder Dynamic Laser Sailboat Dolly: The Castle Group Sailboat Dolly Trailer with Laser Pico Dolly Combo COMMENTS Welcome to RightOn Trailer Welcome to RightOn Trailer Co. Right-On Trailer Co. has been delivering light-weight trailer solutions since 2010 when we introduced our innovative Dolly Trailer for the Laser and Sunfish sailboats. W e continue to provide new and improved trailers designs for the kayaking, sailing, and outdoor community. Laser Dinghy Dollies and Trailers A Laser dolly is a specialized piece of equipment designed to help transport, launch, and retrieve small sailboats. They are also called boat or dinghy dollies as they can carry more than just Laser class sailboats. Made from aluminum or stainless steel, these sturdy dollies are also lightweight. Dolly Trailer & ILCA / Laser Dolly Combo Dolly Trailer & ILCA / Laser Dolly Combo Unassisted loading of your small sailboat is possible through the brilliant design of our dolly trailer. You never have to lift the whole weight of the boat. Right-On Dolly Trailer for Sunfish and Laser Sailboats Our dolly trailer works with the Seitech, Dynamic, and Intensity dollies for Laser, Sunfish, RS Fevaand other small sailboats. The trailer has a sturdy powder coated steel frame and soft springs to absorb road vibration while protecting your boat. Dolly Trailer This Dolly Trailer will work for ILCA/Laser, Sunfish®, Laser II®, RS Feva®, RS Aero®, and Laser Pico®. Please contact us for more information if your one-person sailboat or dinghy is not listed here. New for 2023! Improved corrosion resistance through new powder coat process. Larger and stronger 2″ ball hitch coupler. Laser Dolly and Trailers Laser / ILCA Dolly & Trailers Laser sailboat beach dollies and launching dollies from Seitech and Dynamic Dollies make it easy to move your Laser in and out of the water. Transport your Laser to your next regatta or far off sailing venue with a lightweight road trailer from Right-On or Trailex. Free Shipping on qualifying orders (dollies and dolly parts) with flat rate freight anywhere in the ... Sailboat Dolly Trailer This unique trailer design makes hauling your sailboat a breeze! Designed to hold your Laser on its existing dolly - simply roll on, secure, and go. It is easily managed by one person and can fit both Seitech and Dynamic dolly brands. Dollies & Trailers for the Laser® Sailboat Trailex Aluminum Trailer for the Laser or RS Aero. $1,800.00. Right On Trailer for Laser, Aero & Sunfish. $899.99. Dynamic Dolly for the Laser® Sailboat. $595.00. Sailboat Dolly Trailer with Laser Pico Dolly Combo Sailboat Dolly Trailer with Laser Pico Dolly Combo. This unique trailer design makes hauling your Laser Pico a breeze! Simply roll on, secure, and go. It is easily managed by one person. The trailer can fit both Seitech and Dynamic dolly brands. ***Trailers are shipped broken down and require assembly***. Laser Sailboat CUSTOM TRAILER SETUP Laser Sailboat Custom Trailer Setup and Other Transportation Methods. See links below to all items discussed in the video and thanks again for watching:Laser... Right On Trailer for Laser, Aero & Sunfish Right On Trailer for Laser, Aero & Sunfish. This is a brilliantly simple and cost effective trailer that allows you to easily roll your dolly off and on. You do not have to lift the whole weight of the boat at anytime in the process! Will work with a Dynamic, Seitech or Jotag Dolly with a Sunfis®, Aero, Force 5; M14, Zuma or Laser. Dolly Trailer Systems Our dolly trailer works with the Seitech®, Dynamic®, and Intensity dollies for Laser®, Sunfish®, RS Feva®and other small sailboats. The trailer has a sturdy powder coated steel frame and soft springs to absorb road vibration while protecting your boat. Dynamic Dolly for the Laser® Sailboat Dynamic Dolly for the Laser® Sailboat. Dynamic Dolly, Type 2. NOW INCLUDES FLIP UP GUNWALE SUPPORTS. •Dolly style allows bow of boats with a curled gunwale to hang from a specifically shaped handle fitting. Snug-fitting edge trim atop the handle fitting protects the gunwale gelcoat. Type is suitable for Laser, Byte, Gig Harbor 16, and more. ILCA/LASER DOLLY Strong, 3" non-stretch, polyester sling provides wrap-around boat support. Adjustable, flexible V-fitting on tongue tube provides boat support forward of the sling and prevent boat and aluminum contact. Eyelets on sling and handle fittings facilitate securing boat to dolly in storage, on trailers or in racks. Sailboats The trailer can fit both Seitech and Dynamic dolly brands ***Trailers are shipped broken down and require... Decrease Quantity of Sailboat Dolly Trailer with Laser Pico Dolly Combo One Design Laser Trailers Dollies Buy online One Design Laser Sailboat Laser Trailers and Dollies at the best price. Technical support at Vela Sailing Store. A committed team of sailors offering the best customer service, sailing gear and parts. Free shipping. Discounted Laser sailboat parts, pulleys and blocks. Dynamic Laser / ILCA Sailboat Dolly Dynamic Dollies makes launching, retrieving, moving, and storing your ILCA or Laser sailboat a breeze. This dolly is designed specifically for your boat so you can be sure of a great fit. Aluminum tubing with high strength plastic fittings make this dolly lightweight and easy to assemble and transport. The tube sizing and balanced handle load make for easy maneuverability. 16 in x 4 inch ... Dolly Trailer with Box Rack Dolly Trailer with added capacity of a second tiered rack with round 64" crossbars. Easy loading for two Laser®, or Sunfish® sailboats. Doubles capacity and adds versatility. Trailering laser on dolly on trailer IF you can find a laser specific used Trailex or Kitty Hawk trailer for $500.00 buy it! It's easy to move the boat from dolly to trailer and back solo. Dolly and mast parts secure to the top of the boat on fht etrailer for transport. Feb 4, 2020. #10. Seitech Boat Launching Dolly Seitech Boat Launching Dolly Launching Dolly for Sailboats Such as Sunfish, Laser, Optimist, Club 420, Pico, Snark, Zuma, Force 5 and Similar Sailboats. Also for Small Boats, Jon Boats, Zodiac Style Inflatables, Catamarans, Canoes, Kayaks & Rowing Shells. Dynamic ILCA/Laser Dolly with Standard Wheels The Dynamic ILCA/Laser dolly for the Right-On Dolly Trailer. This dolly makes hand launching a breeze. Premium dolly for your ILCA/Laser sailboat. $ 595.00 - $ 620.00. Assembly. Where Can I Get Plans for a Homemade Laser Dolly I appreciate the plans and material list for the laser dolly you referenced but do you have specific dimensions for the sections of the rear axle between the "tees" and the length of the 2" tubes that run from the rear axle to the front? Thank you. Dolly Trailer & Sunfish Dolly Combo Unassisted loading of your Sunfish sailboat is possible through the brilliant design of our dolly trailer. You never have to lift the whole weight of the boat. catamaran gulet motorboat powerboat riverboat sailboat trimaran yacht