Boats Sailboats New Product HydroPro Affinity RG65 Racing Yacht exclusive to HobbyKing
Page 1 of 6
1
(2 min 16 sec)
over the years
Secondly re your comment on "Business Model" we basically listened and sought feedback from a number of different RG65 communities around the world and came up with a race ready RG65 at the price point that people were prepared to pay. One other main concern was that clubs wanted a race ready boat that could be sailed in RG65 Classes, or a One Design Class or General Mixed Fleet handicap scenarios, something that prospective new club members could purchase one day and have on eh water the next. In the past clubs would lose a lot of prospective new members with for example the Soling One Meter class due to the build issue/time to build, it would discourage someone who perhaps did not have the skills needed or the time to build a yacht, they just wanted to get on the water and start racing. This mirrors the RC plane market with the advent of Ready to Fly Foamie's getting people in the air quickly.
Lots more in the pipeline so stay tuned.
More Yachts to follow...stay tuned guys.
.
RCGroups Message
Quick Reply
The following errors occurred with your submission
Thread Tools
Electric Flight
Advertising
Our Sponsors
Review Policies
Terms of Service
Privacy Policy
Site History
Mark Forums Read
Member Search
Upcoming Articles
Do Not Sell My Data
Manage Consent
Back to Top
Keel bulbs pre-cast with slot , in varying weights
RG65 RC Sailboat: Design, Racing, Building, and Maintenance Guide
By - Kyle Hilson
Posted on November 14, 2023 November 15, 2023
Posted in RC Boats
The RG65 RC Sailboat is a popular model sailboat that is enjoyed by hobbyists and enthusiasts around the world. There are many different types of sailboats, but the RG65 is known for its compact size and maneuverability, making it a great choice for competitive racing and leisurely sailing alike. The sailboat’s sleek and streamlined design allows for fast speeds and easy maneuverability, while its lightweight construction further enhances its performance. The hull shape and sail design are also essential elements that have a significant impact on the boat’s performance. In the following paragraphs, we will discuss the design and performance of the RG65, as well as the racing and competition opportunities available for enthusiasts. We will also give tips for building your own RG65 and proper maintenance and care to extend the life of your sailboat.
RG65 RC Sailboat: Sleek, Streamlined Design for Optimal Performance on the Water
What is the technical specification of the RG65 RC Sailboat?
The technical specifications of the RG65 RC Sailboat include a maximum length of 65cm, maximum beam of 14cm, and minimum weight of 550g. The sail area is typically 2250cm² and the hull is made of fiberglass or other composite materials. The boat is controlled by a two channel radio system and features a keel bulb for stability.
RG65 RC Sailboat racing conquers the world with its challenging races and competitions.
RG65 RC Sailboat racing has become popular over the years, with numerous competitions worldwide. There is an increasing number of enthusiasts who are participating in these competitions. It has become a more challenging sport due to the high level of strategy and skill required to succeed. There are different types of races for different levels of skill, including local , regional , and international competitions. The RG65 Class Association oversees the most significant number of races and competitions worldwide. In 2021, the World Championship is scheduled to take place in Argentina.
The following is a table of the most crucial international RG65 RC Sailboat competitions:
Name
Description
Date
The most significant competition, brings together the best RG65 sailors from all over the world.
2021, Argentina
Euro-centric competition that allows sailors to compete in their local region.
2021, Italy
A series of competitions that span across countries each providing a unique opportunity for sailors to participate and win the World Cup
Various dates and locations
What is the RG65 Class Association and what is its role in overseeing RC sailboat races and competitions worldwide?
The RG65 Class Association is a global organization that oversees RC sailboat races and competitions for the RG65 class of radio-controlled boats. Its role is to ensure fair play, safety, and consistency in racing rules and regulations worldwide.
Tips and advice for building your own RG65 RC Sailboat.
Building your own RG65 RC Sailboat can be a fulfilling experience. Here are some tips and advice for getting started:
Choose materials based on your budget and preferences. Wood , fiberglass , and carbon fiber are typical choices.
Select tools carefully based on the materials you’re working with, including saws, drills, sanders, and measuring tools.
Follow detailed instructions to ensure that every component is assembled correctly.
Get the proper measurements and dimensions for the boat since even small variations can greatly impact the boat’s performance.
Find resources and forums online to connect with other enthusiasts and learn from their experiences. The RG65 Class Association website is an excellent source of information, including detailed instructions and plans to build your own RG65.
Consider purchasing a kit if you’re new to building or if you prefer to avoid the complexities of sourcing individual parts.
What are some websites where you can purchase RG65 kits and materials?
Some websites where you can purchase RG65 kits and materials include Progressive RC, RC Sailboat Kits, and Sailing RC.
Maximizing the lifespan and performance of your RG65 RC sailboat: essential maintenance tips.
Proper maintenance and care are crucial for optimal performance and to extend the life of your RG65 RC Sailboat . Here are some tips to keep your boat in great condition:
After each use, rinse the boat with fresh water and dry it thoroughly.
Clean the sails and rigging to remove any dirt or salt buildup.
Store the boat in a dry, cool location, ideally out of direct sunlight and away from extreme temperatures.
Check the rigging , lines, and hardware regularly for signs of wear and damage. Replace any damaged parts promptly to avoid bigger problems.
Before each sail, conduct a thorough pre-flight check to ensure that everything is in good condition and that the boat is running smoothly.
Find resources and guides online or in sailing magazines that can help you learn more about maintaining and caring for your RG65 RC Sailboat . Examples of helpful websites include the RG65 Class Association website and RCGroups forum, which has a dedicated section for RG65 boats.
Consider investing in a sail repair kit , which can come in handy in the event of tears or punctures in the sails.
What are some resources and guides available online for maintaining an RG65 RC sailboat?
There are several resources and guides available online for maintaining an RG65 RC sailboat, including forums, articles, and instructional videos. Some popular websites include Rg65.org, RCGroups.com, and Sailsetc2.com. Additionally, manufacturers of RG65 sailboats such as Goetzinger, Cheinzinger, and DMS offer maintenance tips and manuals on their websites.
Building and maintaining an RG65 RC Sailboat can be a rewarding and enjoyable hobby for enthusiasts of all ages. Whether you are interested in competitive racing or leisurely sailing, the RG65 offers a compact, nimble design that is both fast and fun to operate. With proper maintenance and care, you can extend the life of your boat and keep it running at peak performance for years to come. If you are interested in building your own RG65, there are many resources and guides available online that can help you get started. Whether you are a seasoned sailor or just starting out, the RG65 RC Sailboat is a great choice for anyone who loves the thrill of sailing on the water.
Overall, the RG65 RC Sailboat is an exciting and rewarding hobby that offers something for everyone. With its sleek design, fast speeds, and maneuverability, the RG65 is a popular choice for both competitive racing and leisurely sailing. Whether you choose to build your own boat or purchase one ready-made, taking the time to learn about maintenance and care will help ensure that your RG65 runs smoothly and lasts for years to come. So why not get started today and experience the fun of sailing with an RG65 RC Sailboat?
Previous Article
Next article.
MYA Districts
MYA Ranking Lists
Measurement & Certification
Status of Class: Affiliated
The RG65 is an affiliated class to the MYA and its rules and measurement are covered by the class itself.
RG65 Class Captain Contact here
RG65 Class website here
RG65 UK Class website here
RG65 Class Events here
RG65 Class Rules: here
RG65 Class Measurement Forms: Contained in the Class Rules document.
RG65 Boats For Sale or Wanted here
Please visit our Knowledgebase or Q&A for more help
previous post: 36″ Class
next post: DF65-95 Classes
AMERICA'S CUP
CLASSIFIEDS
NEWSLETTERS
SUBMIT NEWS
The affordable & available ARTS (almost ready to sail) radio controlled racing yacht. The RG65 is a development class for 65cm long radio controlled yachts which means that anything not mentioned in the rules is allowed. The simple rules are designed to encourage people to try new ideas at a modest cost. The Dragon Force 65 is a separate class but also measures as an RG65 and is eligible to race in RG65 events.
A one design r/c model racing yacht, the 25.8″ Dragon Force 65 was a modified RG65 Class boat derived from Mark Dick’s narrow hull RG65 ICE design. The Dragon Force features an ABS molded hull, profiled aluminum fin, molded plastic rudder, shroudless rig, carbon mast and booms, ball raced kicker/gooseneck fitting, and watertight construction. Joysway (the manufacturer) provides the Dragon Force as a near complete model requiring only assembly of the standing rigging and deck sail control lines (an A Rig is supplied), installation of keel and rudder, and addition of batteries. Electronics are installed, and a boat stand and radio/transmitter are included.
The Dragon Force 65 is the work of designers Mike Weston, John Tushingham and Mark Dicks who began collaborating with Joysway in 2011 to develop a high performing but inexpensive r/c model racing yacht. Time constraints on the project required the design team to adopt an existing class/design that had already demonstrated serious performance, and to modify the design to make it affordable. The RG65 (a developmental class) “ICE” design was considered the best candidate. To insure close performance sailing and modest cost, restricted design rules would also be required. The result was the one design Dragon Force 65 introduced in 2013. The Dragon Force 65 is already sailed worldwide with large followings around the world.
The Dragon Force 65 Class Rules require the boat to be raced “as supplied by” the manufacturer with no modifications except those articulated in the rules as “permitted changes.” A+, A, B and C Rigs are permissible (dimensions are provided), as are after market sails. Some substitution of electronic equipment and rigging materials is allowed as well. A number of the permitted changes improve the integrity (reliability) of the sailboat, and were added as the design team improved the manufactured product (Dragon Force 65 Version 6 is now on the market). Work on improving the Dragon Force is ongoing, and additional allowable modifications are published as “Hints & Tips”. Text of these is available at the UK Dragon Force 65 web site. An excellent illustrated version of the “ Hints & Tips ” is provided by Abersoch Boatyards in the UK.
DF 65 Registrar US https://dragonforce65.us/df65usa-registration-form/
MENTORS / BUILDING RESOURCES
Here (link to dragonforce65.us) you can find:
US distributors of boats, accessories, and parts
DragonForce65 Restricted Class Rules v1.8.4 (update)
USA class registration
Boat/sail number selection and placement
Rigging and tuning guides & tips
Useful Facebook sites include the “ Dragon Force ” Group s
Building / Sail Making / Resources
The files that follow are PDF’s of DF65 A, A+, B, C sails that can be printed full size. The drawings are made from data in the Class Rules and Mainsail Luff Curve reflects measurements from production sails. DF65A+ Templ
Abersoch boatyard service (uk) Dragonforce 65 Hints & Tips
See our LINKS Page for additional building / sailing resources.
Leave a comment Cancel reply
Already have a WordPress.com account? Log in now.
Subscribe Subscribed
Copy shortlink
Report this content
View post in Reader
Manage subscriptions
Collapse this bar
Vanquish 65
Mini Maniac
RG65 Appendages
Maniac MK II
IOM Appendages
Marblehead Class
Marblehead Appendages
RT65 Ragnarok
RT65R Armageddon
RC65 Adrenaline
ST65 Sowelu
Mini40 / F48 Class
Nightmare X
Nightmare MK VIII
MultiOne Class
FireDragon 1000
DIY Sail Winch
Rig Building
Click the pictures to expand
Browse the pictures using the slider, click the center picture to expand
Browse the pictures using the slider, click the center picture to view the video clip.
Welcome to the RG65 USA Website!
Your online resource for the fastest growing radio sailing class in the USA! This 65 cm boat is a well established worldwide class, which is capable of handling winds up to 30 Knots with multiple rigs to make your radio sailing experience fun and challenging!
Lightweight / Most boats weigh about 1 Kg
Portable / Can fit fully rigged in a small car
Economical / Smaller servos , parts and sails keep costs reasonable
Durable / Multiple rigs allow for these boats to handle nearly any wind
Fast / High Aspect sails, Hi tech rigs and unlimited boat designs allow RG65s to push open the performance envelope
Worldwide Class
RG65 USA is a voting member of the RG65 International Class Association and we sail by the same rules worldwide! Sailors from many different countries enjoy sailing the RG65 Class, offering many different approaches to boat design, venues, and information
Developmental Class
There are hundreds of RG65 designs available to build or buy... the only limit is your imagination! The RG65 is the perfect class whether you like to develop new designs, build your own boat, or just sail fast! The economical 65 cm size of the RG65 wont break your boat budget. Smaller Servos, Sails, and hulls equal easy entry for new skippers! RG65s are about Half the size of Marbleheads, and 65% of IOMs
Racing Sparrow Plans
Check out these plans and resources, ranging from a 375mm boat to a 1500mm yacht. Pair these with our eBook guide for a fast, easy, and affordable home build RC yacht.
RS-RG65 - 650mm plans, measures to international RG65 rules
A full forward hull and a straight stern. This boat has proven to be a very fast and competitive racer.
Free Book Sample - PDF
A few pages from the eBook absolutely free
Racing Sparrow 750 plans
The plans that come with the eBook.
Racing Sparrow 1000 plans
A one metre version, scaled up lines. Bulkhead only plans. Look at the 750 for full schematics.
Racing Sparrow 1500 plans - A scaled up Racing Sparrow
A larger size model yacht. I haven't seen many of these surface. It's a good challenge to build.
Racing Sparrow 375 plans - The smallest sparrow
A miniature RacingSparrow. A great introduction to building with balsa.
RacingSparrow Footy plans
A double diagonal design footy from RacingSparrow.
Logos & Sticker Sheet
Downloadable logos and an EPS file to be sent to a printer and printed out on navy blue cutout vinyl.
Do I need the eBook to build this cool rc sailboat?
No you don't. The book is designed for the newcomer to model yacht building. The book does make it a much simpler process with every detail figured out and covered in the book. Seasoned builders can simply have a go with the free plans.
Are the plans really free?
Yes all the plans are free to download and use as you see fit. The most comprehensive plans are the RS750 A1 full size.
Are there CAD files or 3D files?
Yes there is a 3D dxf file inside a zip file that you can download for free and use how you want. Some people use this in CAD programs or in 3D modelling programmes to great effect. Look under Racing Sparrow 750 plans on this page. An STL file for 3D printing is in the pipelines. Email me if you want a copy.
While we think 3D printing is great, we believe old-skool strip planking balsa is a wonderfully simple way to make a very lightweight boat with excellent longitudinal strength and beauty.
Builders eBook
Dive into the world of boat building with our eBook. Discover the craft of hull planking, fibreglass strengthening, and lead keel ballast casting.
Master the art of electrics installation, spray painting, sail making, and tuning of sails. Download a sample today and embark on a rewarding journey of boat construction.
What the builders and sailors say:
Being a complete novice, I purchased your book a couple of years ago and built two racing sparrows. Building on this experience I then went on to build, from scratch, an IOM (Triple Crown design). I've since joined a local club and sail virtually every weekend. I would just like to thank you for your endeavours which have allowed me to enter a world I never thought was in my reach.
John Sterland, Australia
Coming upon your book, "Build your own Radio Controlled Yacht" in the Napier Public Library, I am hugely impressed. The combination of your superb photos and illustrations with your easy writing style make it a standout publication and I hope it does well for you.
Richard Spence, New Zealand
Thanks for an excellent design in your RG65. I trialled her again today in a solid 20 knots gusting higher. Even so in a steep chop and fingers off the rudder she drove upwind remarkably well, balanced perfectly. Very impressed that a model boat can handle that with a large rig. I found the book excellent. Ive built several big boats, plus a few skiffs and without that resource building such a good boat would have been impossible.
Mike Bennett
Look at all these cool boats folk have made at home
There is also a full gallery with a boat load of photos of Racing Sparrow's
Kevins stunning RG65 , New Zealand
Aug 1, 2013
Andrew Scott - RS1000 , Ayrshire, Scotland
Jun 9, 2010
Build a sparrow in less than 3 hours!
Oct 18, 2013
Take a look at the blog section for a full write up about this model.
Alan Brown Catamaran Racing Sparrow derivitive , Perth, Western Australia
Jul 23, 2020
Graham Long , Auckland, New Zealand
Dec 17, 2009
Jonathon Gillham , New Zealand
Oct 11, 2018
A reconditioned RS750 by the designer Bryn , New Zealand
Aug 3, 2009
Royal Declerks' Black Pearl , Australia
Apr 2, 2017
Hi Bryn, let me introduce you to “Jack Sparrows” sister, Black Pearl, yet to have sail markings done and some rig adjustments. Regards Royal.
Peter Hill - RS750 , Henderson, Auckland
Dec 1, 2023
Weighing up the options - Garry Angel , France
May 2, 2009
Frank Russell Design
R/c and model yacht design, plans, boats, sails., rg65 – 65.
Epsilon RG65 – 65 2019: This design is based on the successful Ellipsis IOM concept, that of correct volume distribution rather than fashionable features with the emphasis on simplicity and efficiency.
After payment is made. I will email you the pdf file.
If you require another format: DXF, or DWG or printed paper plan, postage extra.
Epsilon Basic Hull and Deck STL: This is suitable for turning into 3D drawings for 3D printing. Can also be used as is for CNC.
You should be aware that you also need to purchase the plan of the Epsilon RG to build the boat as the licence is attached to the plan not to this drawing.
Goth XP RG – RG65 Plan is the 2015 development of the FREE Goth RG Plan.
After payment is made. I will email you the pdf file with 5 A4 and 2 A3 sheets.
If you require another format: DXF, or DWG, 2D or 3D or printed paper plan, postage extra.
Just Added to Your Cart
Free shipping over $99*
30 Day Money Back Guarantee
Expert Support Staff
Country/region
Argentina (USD $)
Australia (USD $)
Austria (USD $)
Belgium (USD $)
Brazil (USD $)
Bulgaria (USD $)
Canada (USD $)
Chile (USD $)
Costa Rica (USD $)
Croatia (USD $)
Cyprus (USD $)
Czechia (USD $)
Denmark (USD $)
Finland (USD $)
France (USD $)
Germany (USD $)
Greece (USD $)
Hungary (USD $)
India (USD $)
Indonesia (USD $)
Ireland (USD $)
Israel (USD $)
Italy (USD $)
Japan (USD $)
Latvia (USD $)
Liechtenstein (USD $)
Lithuania (USD $)
Luxembourg (USD $)
Malaysia (USD $)
Mexico (USD $)
Netherlands (USD $)
New Caledonia (USD $)
New Zealand (USD $)
Norway (USD $)
Philippines (USD $)
Poland (USD $)
Portugal (USD $)
Qatar (USD $)
Romania (USD $)
Saudi Arabia (USD $)
Singapore (USD $)
Slovakia (USD $)
Slovenia (USD $)
South Korea (USD $)
Spain (USD $)
Sweden (USD $)
Switzerland (USD $)
Taiwan (USD $)
Thailand (USD $)
U.S. Outlying Islands (USD $)
United Arab Emirates (USD $)
United Kingdom (USD $)
United States (USD $)
Vietnam (USD $)
1-224-633-9090
Help Center
What is Affirm?
RC Knowledge Blog
Suggest A Product
Report Website Issue
Hobby Squawk Forum
RC Event Calendar
Become an Affiliate
Bancroft 650mm RG65 Quickfire Green Racing Sailboat Hull
Select Product Format
Your wishlist has been temporarily saved. Please Log in to save it permanently.
650mm RG65 Quickfire Green Racing Sailboat Hull from Bancroft - BNC1013-103
Product questions & answers.
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Adding product to your cart
Customer Reviews
ARF BUNDLE - ARF plus Electronics - $219.00
Hobby Squawk Community Forum
Guidance & advice for beginners
Motion RC has a new European Website
Continue to the European site
Stay on the US site
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
3D Printed Radio Yachts
How To Design And 3D Print Rigid Lightweight Yachts To Go Racing
“Lipstick”: The Latest 3d Printed RG65
Introducing “lipstick”, the development continues…..
Introducing the latest RG65 from the combined efforts of Bill Hagerup and Selwyn Holland.
In fact this is an updated variation of the “Shrink” series that I have been sailing here in Australia. The “Glass Lady” was the last prototype in the series and can be viewed elsewhere in the site.
So what is different?
Mainly on the construction side:
a slightly thicker hull for resilience (added 20g). The “Glass Lady” has had no problems on the water but I have had feedback from those constructing their own that during the building process they occasionally cracked something while cutting. Easy to fix at the time but an experiment with hull thicknesses totally solved the problem anyway. All part of the ongoing research and exposure of what we have learnt on the way. Hopefully others will be able to start in a more advanced position than what we did.
Some minor changes to how the internal running gear fits in. The original is proving very efficient and this just added a bit to it.
The main change was the position of the mast/keel case . This was moved back 10 mm and seems to be a slight improvement on balance/performance particularly in the heavier chop. Time will tell. The “Glass Lady” is a fast and very competitive RG and “Lipstick” is feeling just as good and so far a bit better in short chop, stronger breezes, yet still very fast in the lighter conditions. Time will tell, I can hardly wait to get it to some regattas.
The addition of a slightly heavier 3d printed bulb and very stiff 3d printed keel to be used at those fast and furious events. As a side note, I started using a hydro-dynamically efficient 3d printed bulb a while back more as a dare to see if it could be done. It went so well that I have not bothered to take it off. I have seen no disadvantage at all compared to standard lead only bulbs and so much easier to make.
Nothing was done to the outside surface of this model. We have discovered that the fine matte finish is no hindrance to performance and is very resilient to bumps and scraps, definitely superior to paint. So we just leave it as it is. The colour is within the printed PLA, not on the surface.
The initial trials have gone very well and this will now be my personal racing craft.
Enjoy the images.
Selwyn Holland.
Any questions can be sent to [email protected]. Be patient, I get to them as a soon as I can. I will say I am staggered and heartened by the amount of interest and the quality of the questions coming through.
Latest update:
The more I sail it, the faster it seems to want to go. The sails are a standard jib and a rather radical double luff single sheet main. The combination of both of these seems to easily keep with and often beat both the best RG65 swing rigs and now the new A+ rig on the latest DF. The A+ has a larger surface area than the maximum Rg 65 rig.
Results from our latest Club Championship round included 2 6 1 1 2 5 1 from a strong fleet of 11 yachts. That was a comfortable overall win for the round. It is rarely out of the top three in club sailing and championships.
I can hardly wait to get it to a major RG65 competition. An earlier design won the Australia Day Regatta last year in Sydney.
Recent Orders
Free Delivery Over £100 UK Mainland
Join our CMB Club - Get 5% Off
Here to help on 01840 211009
Puma Model Boat Plan
Description
Two sheet plans for round bilge planked hull RG65 class design. Length 650 mm beam 120 mm. Plans have full details of ALL hull rigs radio installation and sails. Length 650 mm beam 180 mm compies with RG65 class rules. Designer Maximo lange Featured in MMI 2007 Plans Special Issue 2 Star Difficulty Rating
Ask a question about a product
Full Name *
Confirm Email * *
Your Question
Customers who bought this product also bought
Best Sellers
RRP 2.99 You Save £0.38
RRP 2.75 You Save £0.29
New products.
Recently Viewed
Please select next action
Go back ( or ) Go to wish list
RG65 UK Class Association
Overall TT Results
Registration
Class Rules
Contributions Welcome
TT Rounds 8 & 9 date changes
By RG65 NCA
On July 30, 2024
In Uncategorized
The NoR will be released shortly and the MYA Calendar and Entry details will be released at the same time.
TT Series Overall after Woodspring
On July 9, 2024
The TT Series Overall after 3 rounds and the rescheduled TT#5 at Woodspring are as follows:
RG65 TT#5 @ Woodspring
New Location for TT5
On June 24, 2024
Woodspring have kindly agreed to host TT5 in place of the one which had to be cancelled at Bournville on the same day. Unfortunately there will not currently be a TT6.
For more details such as the NoR and to enter, please head over to the relevant MYA Event page:
John Tushingham heads the overall TT series after the first two 2024 events at Keighley.
RG65 TT Round 4 @ Keighley – 2/6/24
It was a bright and sunny morning with a decent swing rig breeze that greeted the eleven sailors for Round 4 of this years TT. However, by the time racing started under the watchful eye of RO Damian Ackroyd, the breeze had started to build and most boats were sporting their full sized conventional rigs. During the day, the breeze built (needing a change down) and remained from a mostly Westerly direction, giving a course where the windward mark was at the limits for good visbility and boats that were sailing away from the skippers. There was plenty to be gained (and for some lost) in the gusts and shifts that existed across the course and throughout the day.
However, the one consistent aspect of the day was Graham Elliott sailing an Electronica, which managed to win 15 of the 16 races, with only Peter Baldwin (Uno) spoiling his clean sweep by winning race 1, although that was by the slimmest of margins having had a good lead throughout the race.
There was a good tussle all day between Peter and John Tushingham (Sliver) to see who might get the second place and by the end, John took the spot with a slightly more consistent set of results over the day. Special mention should go to Grant Rowe, who only started out Radio Sailing recently and had never sailed an RG65 before this weekend and finished a very creditable fourth in his borrowed Scurry.
This was a great days sailing at a relaxed pace and minimal walking with the course situated in front of the launching area and with some seating for a few as an added bonus!
The next two rounds of this years TT are scheduled to be held at Borunville on 6th and 7th July.
TT Round 3 – Sat 1/6/24
On June 1, 2024
In Events & Results
Here are the results for Saturday.
Some close racing across the fleet with everyone in B rigs, all in conventional except for #45 who used a swing rig to good effect in the later races. A day for an Ivy 1 and 2.
Upcoming TT Events
On May 23, 2024
Entry is via the MYA website using the following links:
Entry oficially closes on Thursday 30th June at 18:00
With all the rain we have had in the last couple of days, the lake should be full, it doesn’t suffer from weed and there is usually some wind being perched up on the moors.
The events after this are TT 5&6 at Bournville on the 6th & 7th July.
2024 TT Series Dates
On January 11, 2024
Here are the dates for the 2024 TT Series. Further information and how to enter will be communicated via the MYA Events page:
https://www.mya-uk.org.uk/events/
TT1 & TT2 – 13/14 April at Two Islands (Milton Keynes)
TT3 & TT4 – 1/2 June at Keighley
TT5 & TT6 – 6/7 July at Bournville
TT7 Nationals – 21/22 Sept at Eastbourne
TT8 & TT9 19/20 October at Birkenhead.
2023 TT Series Overall placings
On November 7, 2023
Apologies, but I forgot to update the overall results after both the Nationals and then the final two events at Eastbourne. The planned series had eleven events, although Watermead was lost due to lack of entries. So 10 events and 6 to count for the series. Congratulations to our series winner this year Tobi Laux sailing his own Ivy design.
Page 1 of 7
Powered by WordPress & Theme by Anders Norén
AMERICA'S CUP
CLASSIFIEDS
NEWSLETTERS
SUBMIT NEWS
The affordable & available ARTS (almost ready to sail) radio controlled racing yacht. The RG65 is a development class for 65cm long radio controlled yachts which means that anything not mentioned in the rules is allowed. The simple rules are designed to encourage people to try new ideas at a modest cost. The Dragon Force 65 is a separate class but also measures as an RG65 and is eligible to race in RG65 events.
Joysway DragonForce 65 V5 RG65 Class RC Yacht at Hobby Warehouse
Goth, hand made RG65 original design by Frank Russell
RG65/DragonForce @ Bournville
HobbyKing HydroPro Affinity RG65 Yacht [VIDEO]
JOYSWAY DRAGON FORCE 65 V6 YACHT ARTR SAILBOAT RG65 CLASS
Rg65 sailboat plans ~ Shena
COMMENTS
All Radio Sailboats
RG65 Beili Model (CHN) Pro Wind 65. RG65 Célio Souza (BRA) Promek 65. RG65 Hugo de La Quintana (ARG) Qroo. RG65 Pascal Delapierre (FRA) Quickfire. RG65 Bancroft (NDL) R46/TP52. RG65 Stockmaritime (DEU) Razor. ... RG65 Ceccarelli Yacht Designs (ITA) Urca 65. RG65 Claudio Vigada (ITA)
HydroPro Affinity RG65 Racing Yacht exclusive to HobbyKing
As a perfect introduction to R/C Yacht Racing the HydroPro Affinity RG65 Class Racing Yacht is hard to beat! The HydroPro Affinity stands out from its closest competitors by including 2 complete racing rigs with mylar sails at a fraction of the cost of lesser optioned boats. Quick and easy to assemble, the Affinity will have you on the water ...
the 650 rg-65
the 650 rg-65. Built to fit within the international "RG-65" class rule for yachts 650mm long, the 650 is also suited as a strict one-design class. Designed to be easily and accurately assembled the 650 has a plug together hull and deck with integral radio control screw top pot or moulded tray, "god pod" to keep electrics safe.
UNO
> R/C - Model Yachts > UNO - RG 65. UNO - RG 65. Previous Next. UNO - RG 65. RG 65 RADIO CONTROL . UNO - RG 65 Technical data. LOA 65 Cm; LWL 65 Cm. UNO is the latest CYD design for RG 65 , radio control class build in series in Spain from Victor Izquierdo in Valencia the former VAM SAILS.
RG65 RC Sailboat: Design, Racing, Building, and Maintenance Guide
The technical specifications of the RG65 RC Sailboat include a maximum length of 65cm, maximum beam of 14cm, and minimum weight of 550g. The sail area is typically 2250cm² and the hull is made of fiberglass or other composite materials. The boat is controlled by a two channel radio system and features a keel bulb for stability.
RG65 Class
Measurement & Certification. RG65 Class. Estimated reading time: < 5 min. Status of Class: Affiliated. The RG65 is an affiliated class to the MYA and its rules and measurement are covered by the class itself. There are now nearly 2000 RG65's registered in the UK. RG65 Class Captain Contact here.
RG65 class
RG65. The affordable & available ARTS (almost ready to sail) radio controlled racing yacht. The RG65 is a development class for 65cm long radio controlled yachts which means that anything not mentioned in the rules is allowed. ... A weekend of lots of model yacht racing, meals out and banter Posted on 12 Oct 2021 2021 RG65 GBR Nationals at ...
Dragon Force 65
A one design r/c model racing yacht, the 25.8″ Dragon Force 65 was a modified RG65 Class boat derived from Mark Dick's narrow hull RG65 ICE design. The Dragon Force features an ABS molded hull, profiled aluminum fin, molded plastic rudder, shroudless rig, carbon mast and booms, ball raced kicker/gooseneck fitting, and watertight construction.
RG65 International Class Association
RG65 International Class Association. The "RG-65" is a Radio Controlled Monohull Sailboat, 65cm long, driven by sails with up to 2250 cm2 of area. By definition a Development Class, every variation or innovation is allowed, except if specifically prohibited by the Class Rules with certification of compliance to rules through a Self ...
RCSails
Noux 65 - RG65 Racing Yacht Our Noux 65 racing yacht is a Anders Wallin Design adapted from IOM to RG65 by RCSails. The Noux 65 is a boat with excellent performance from light to strong winds. Boat Data: - hull lenght 644 mm without front fender - beam 140 mm - epoxy-fiber glass hull molding , weight including primer about 100g - without primer 50g
Build it yourself
To get started on your Racing Sparrow model RC yacht project, purchase our eBook and download the PDF now. Purchase PDF eBook $14.99 *USD. Paypal or Credit Card accepted. ... Thanks for an excellent design in your RG65. I trialled her again today in a solid 20 knots gusting higher. Even so in a steep chop and fingers off the rudder she drove ...
Welcome to the RG65 USA We bsite!
Welcome to the RG65 USA We bsite! Your online resource for the fastest growing radio sailing class in the USA! This 65 cm boat is a well established worldwide class, which is capable of handling winds up to 30 Knots with multiple rigs to make your radio sailing experience fun and challenging! ... The economical 65 cm size of the RG65 wont break ...
Free RC Sailboat Plan Downloads
RS-RG65 - 650mm plans, measures to international RG65 rules. A full forward hull and a straight stern. This boat has proven to be a very fast and competitive racer. RacingSparrow RG65 v2. Free Book Sample - PDF. ... The book is designed for the newcomer to model yacht building. The book does make it a much simpler process with every detail ...
RG65
Epsilon Basic Hull and Deck STL: This is suitable for turning into 3D drawings for 3D printing. Can also be used as is for CNC. You should be aware that you also need to purchase the plan of the Epsilon RG to build the boat as the licence is attached to the plan not to this drawing. $15AUD. Goth XP RG - RG65 Plan is the 2015 development of ...
Kit B: The RG65 3D Lightweight Flyer
Image 1: Full 3D Lightweight Flyer, design by Bill Hagerup. Image 2: Deck layout of the Full 3D Lightweight Flyer. Image 3: "Glass Lady" Full 3D Lightweight Flyer, similar to the one you will be receiving. In a nutshell, what you will be getting is: A "3D Lightweight Flyer" Hull with essential fittings: reinforced keel box, battery ...
Bancroft 650mm RG65 Quickfire Green Racing Sailboat Hull ...
Bancroft 650mm RG65 Quickfire Green Racing Sailboat Hull. $ 69 99. Buy in monthly payments with Affirm on orders over $50. Learn more. In stock. Only 5 left, Order soon! Add to cart. Add to Wishlist. 650mm RG65 Quickfire Green Racing Sailboat Hull from Bancroft - BNC1013-103.
RG65 Dragon Force Open at Woking Model Yacht Club
A weekend of lots of model yacht racing, meals out and banter Let's begin of Friday, it was a lovely day, plenty of warm autumn sunshine and a great day for sitting at The Perch café opposite the club and chewing the fat with friends as they arrived. Posted on 12 Oct 2021 2021 RG65 GBR Nationals at Keighley
"Lipstick": The Latest 3d Printed RG65
The Development Continues…. Introducing the latest RG65 from the combined efforts of Bill Hagerup and Selwyn Holland. "Lipstick" ready to go. In fact this is an updated variation of the "Shrink" series that I have been sailing here in Australia. The "Glass Lady" was the last prototype in the series and can be viewed elsewhere in ...
Marine Modelling Puma (Model Boat Plan) MAR3291
Length 650 mm beam 180 mm compies with RG65 class rules. Designer Maximo lange Featured in MMI 2007 Plans Special Issue 2 Star Difficulty Rating. Print Details. £17.00 each. Two sheet plans for round bilge planked hull RG65 class design. ... Address Cornwall Model Boats Ltd Unit 3B, Highfield Rd Ind Est Camelford Cornwall PL32 9RA United ...
RG65 UK Class Association
On July 9, 2024. In Uncategorized. The nine committed sailors that found their way to Woodspring near Bristol for the TT5 of the RG65 class were not disappointed. The rainy night gave way to a mostly sunny day and brisk westerly wind. Thank you to Woodspring MSC, particularly Race Secretary Alan Barnstable, for supporting the RG65 class on such ...
RG65 International Class Association
The "RG-65" is a Radio Controlled Monohull Sailboat, 65cm long, driven by sails with up to 2250 cm2 of area. By definition a Development Class, where every variation or innovation is allowed, except if specifically prohibited by the Class Rules with certification of compliance to rules through a Self Certification process. The original ...
RG65 class
RG65. The affordable & available ARTS (almost ready to sail) radio controlled racing yacht. The RG65 is a development class for 65cm long radio controlled yachts which means that anything not mentioned in the rules is allowed. ... A weekend of lots of model yacht racing, meals out and banter Posted on 12 Oct 2021 2021 RG65 GBR Nationals at ...
Builders of the IOM Britpop Robot and Electronica RG65
Robot Yachts is currently offering a choice of ISAF International One Metre (IOM) and RG65 designs. IOM BRITPOP This outstanding IOM design, built under licence from designer Brad Gibson, is our stella product in demand from customers worldwide. The BritPOP hull and foil package together with optimised rig represents a step change in One Metre ...
IMAGES
COMMENTS
RG65 Beili Model (CHN) Pro Wind 65. RG65 Célio Souza (BRA) Promek 65. RG65 Hugo de La Quintana (ARG) Qroo. RG65 Pascal Delapierre (FRA) Quickfire. RG65 Bancroft (NDL) R46/TP52. RG65 Stockmaritime (DEU) Razor. ... RG65 Ceccarelli Yacht Designs (ITA) Urca 65. RG65 Claudio Vigada (ITA)
As a perfect introduction to R/C Yacht Racing the HydroPro Affinity RG65 Class Racing Yacht is hard to beat! The HydroPro Affinity stands out from its closest competitors by including 2 complete racing rigs with mylar sails at a fraction of the cost of lesser optioned boats. Quick and easy to assemble, the Affinity will have you on the water ...
the 650 rg-65. Built to fit within the international "RG-65" class rule for yachts 650mm long, the 650 is also suited as a strict one-design class. Designed to be easily and accurately assembled the 650 has a plug together hull and deck with integral radio control screw top pot or moulded tray, "god pod" to keep electrics safe.
> R/C - Model Yachts > UNO - RG 65. UNO - RG 65. Previous Next. UNO - RG 65. RG 65 RADIO CONTROL . UNO - RG 65 Technical data. LOA 65 Cm; LWL 65 Cm. UNO is the latest CYD design for RG 65 , radio control class build in series in Spain from Victor Izquierdo in Valencia the former VAM SAILS.
The technical specifications of the RG65 RC Sailboat include a maximum length of 65cm, maximum beam of 14cm, and minimum weight of 550g. The sail area is typically 2250cm² and the hull is made of fiberglass or other composite materials. The boat is controlled by a two channel radio system and features a keel bulb for stability.
Measurement & Certification. RG65 Class. Estimated reading time: < 5 min. Status of Class: Affiliated. The RG65 is an affiliated class to the MYA and its rules and measurement are covered by the class itself. There are now nearly 2000 RG65's registered in the UK. RG65 Class Captain Contact here.
RG65. The affordable & available ARTS (almost ready to sail) radio controlled racing yacht. The RG65 is a development class for 65cm long radio controlled yachts which means that anything not mentioned in the rules is allowed. ... A weekend of lots of model yacht racing, meals out and banter Posted on 12 Oct 2021 2021 RG65 GBR Nationals at ...
A one design r/c model racing yacht, the 25.8″ Dragon Force 65 was a modified RG65 Class boat derived from Mark Dick's narrow hull RG65 ICE design. The Dragon Force features an ABS molded hull, profiled aluminum fin, molded plastic rudder, shroudless rig, carbon mast and booms, ball raced kicker/gooseneck fitting, and watertight construction.
RG65 International Class Association. The "RG-65" is a Radio Controlled Monohull Sailboat, 65cm long, driven by sails with up to 2250 cm2 of area. By definition a Development Class, every variation or innovation is allowed, except if specifically prohibited by the Class Rules with certification of compliance to rules through a Self ...
Noux 65 - RG65 Racing Yacht Our Noux 65 racing yacht is a Anders Wallin Design adapted from IOM to RG65 by RCSails. The Noux 65 is a boat with excellent performance from light to strong winds. Boat Data: - hull lenght 644 mm without front fender - beam 140 mm - epoxy-fiber glass hull molding , weight including primer about 100g - without primer 50g
To get started on your Racing Sparrow model RC yacht project, purchase our eBook and download the PDF now. Purchase PDF eBook $14.99 *USD. Paypal or Credit Card accepted. ... Thanks for an excellent design in your RG65. I trialled her again today in a solid 20 knots gusting higher. Even so in a steep chop and fingers off the rudder she drove ...
Welcome to the RG65 USA We bsite! Your online resource for the fastest growing radio sailing class in the USA! This 65 cm boat is a well established worldwide class, which is capable of handling winds up to 30 Knots with multiple rigs to make your radio sailing experience fun and challenging! ... The economical 65 cm size of the RG65 wont break ...
RS-RG65 - 650mm plans, measures to international RG65 rules. A full forward hull and a straight stern. This boat has proven to be a very fast and competitive racer. RacingSparrow RG65 v2. Free Book Sample - PDF. ... The book is designed for the newcomer to model yacht building. The book does make it a much simpler process with every detail ...
Epsilon Basic Hull and Deck STL: This is suitable for turning into 3D drawings for 3D printing. Can also be used as is for CNC. You should be aware that you also need to purchase the plan of the Epsilon RG to build the boat as the licence is attached to the plan not to this drawing. $15AUD. Goth XP RG - RG65 Plan is the 2015 development of ...
Image 1: Full 3D Lightweight Flyer, design by Bill Hagerup. Image 2: Deck layout of the Full 3D Lightweight Flyer. Image 3: "Glass Lady" Full 3D Lightweight Flyer, similar to the one you will be receiving. In a nutshell, what you will be getting is: A "3D Lightweight Flyer" Hull with essential fittings: reinforced keel box, battery ...
Bancroft 650mm RG65 Quickfire Green Racing Sailboat Hull. $ 69 99. Buy in monthly payments with Affirm on orders over $50. Learn more. In stock. Only 5 left, Order soon! Add to cart. Add to Wishlist. 650mm RG65 Quickfire Green Racing Sailboat Hull from Bancroft - BNC1013-103.
A weekend of lots of model yacht racing, meals out and banter Let's begin of Friday, it was a lovely day, plenty of warm autumn sunshine and a great day for sitting at The Perch café opposite the club and chewing the fat with friends as they arrived. Posted on 12 Oct 2021 2021 RG65 GBR Nationals at Keighley
The Development Continues…. Introducing the latest RG65 from the combined efforts of Bill Hagerup and Selwyn Holland. "Lipstick" ready to go. In fact this is an updated variation of the "Shrink" series that I have been sailing here in Australia. The "Glass Lady" was the last prototype in the series and can be viewed elsewhere in ...
Length 650 mm beam 180 mm compies with RG65 class rules. Designer Maximo lange Featured in MMI 2007 Plans Special Issue 2 Star Difficulty Rating. Print Details. £17.00 each. Two sheet plans for round bilge planked hull RG65 class design. ... Address Cornwall Model Boats Ltd Unit 3B, Highfield Rd Ind Est Camelford Cornwall PL32 9RA United ...
On July 9, 2024. In Uncategorized. The nine committed sailors that found their way to Woodspring near Bristol for the TT5 of the RG65 class were not disappointed. The rainy night gave way to a mostly sunny day and brisk westerly wind. Thank you to Woodspring MSC, particularly Race Secretary Alan Barnstable, for supporting the RG65 class on such ...
The "RG-65" is a Radio Controlled Monohull Sailboat, 65cm long, driven by sails with up to 2250 cm2 of area. By definition a Development Class, where every variation or innovation is allowed, except if specifically prohibited by the Class Rules with certification of compliance to rules through a Self Certification process. The original ...
RG65. The affordable & available ARTS (almost ready to sail) radio controlled racing yacht. The RG65 is a development class for 65cm long radio controlled yachts which means that anything not mentioned in the rules is allowed. ... A weekend of lots of model yacht racing, meals out and banter Posted on 12 Oct 2021 2021 RG65 GBR Nationals at ...
Robot Yachts is currently offering a choice of ISAF International One Metre (IOM) and RG65 designs. IOM BRITPOP This outstanding IOM design, built under licence from designer Brad Gibson, is our stella product in demand from customers worldwide. The BritPOP hull and foil package together with optimised rig represents a step change in One Metre ...